 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
SFK - 001
Fitting kit suitable for direct replacement of O/E Plastic Re-Circ Valve which was factory fitted with single use hose clamps and hardware.
SFK – 002
Fitting Kit suitable for twin turbo applications which use 2 x Re-Circ Valves fitted as original equipment using single use hose clamps.
SFK – 003
Fitting Kit relocates the Valve to the cold side of the Intercooler near the Throttle Body on 2WD Cosworth Applications.
SFK - 004
Fitting Kit relocates the Valve to the cold side of the Intercooler near the Throttle Body on 4x4 Sapphire Cosworth Applications.
SFK - 005
Fitting Kit relocates the Valve to the cold side of the Intercooler near the Throttle Body on Escort Cosworth T35 (Large Turbo) Applications.
SFK - 006
Fitting Kit allows a Valve to be fitted on an Escort RS Turbo S1 using a custom manufactured Silicone Boost Hose with a 25mm take off spout.
SFK - 007
Fitting Kit allows a Valve to be fitted on an Escort RS Turbo S2 using a custom manufactured Silicone Boost Hose with a 25mm take off spout.
SFK – 008
Fitting Kit allows a Valve to be fitted on a Fiesta RS Turbo using a custom manufactured Silicone Boost Hose with a 25mm take off spout.
SFK – 009
Fitting Kit allows a Valve to be fitted on Focus RS models (2.0 LTR) using a custom manufactured Silicone Boost Hose with a 25mm take off spout.
SFK – 010
Fitting Kit allows an Atmospheric Venting Valves to be fitted in original location of O/E Re-circulation Valves.
SFK – 011
Fitting Kit allows fitment of a Valve on the cold side of the Intercooler near the Throttle Boby.
SFK – 012
Fitting Kit allows an Atmospheric Venting Valves to be fitted in original location of O/E Re-circulation Valves.
SFK – 013
Fitting Kit allows an Atmospheric Venting Valves to be fitted in original location of O/E Re-circulation Valves.
SFK – 014
Fitting Kit allows O/E Valve location to be blanked off on all Cosworth Models (Not Small Turbo T25 Escort models) where Samco throttle body hose (with 25mm Valve Spout) has already been fitted.
SFK – 015
Fitting Kit allows an Atmospheric Venting Valves to be fitted in original location of O/E Re-circulation Valves.
SFK – 016
Fitting Kit allows an Atmospheric Venting Valves to be fitted in original location of O/E Re-circulation Valves.
SFK – 017
Fitting Kit allows a Valve to be fitted on Renault 5 GT Turbo’s Phase 1+2 using a custom manufactured Silicone Boost Hose with a 25mm take off spout.
SFK – 018
Fitting Kit allows an Atmospheric Venting Valve to be fitted on Toyota MR2 Turbo models.
